Power Consumption - Lexmark 280 User Manual

Battery notice
This product contains Perchlorate material. Special handling may apply. For more information, go to
http://www.dtsc.ca.gov/hazardouswaste/perchlorate/.
ENERGY STAR
Laser notice
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser
products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.
Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is
a maximum 15 milliwatt gallium arsenide laser operating in the wavelength of 770-795 nanometers. The laser system
and printer are designed so there is never any human access to laser radiation above a Class I level during normal
operation, user maintenance, or prescribed service condition.

Power consumption

Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode Description
Printing The product is generating hard-copy output from electronic inputs.
Copying The product is generating hard-copy output from hard-copy original
documents.
Scanning The product is scanning hard-copy documents.
Ready The product is waiting for a print job.
Power Saver The product is in energy-saving mode.
Off The product is plugged into a wall outlet, but the power switch is turned
off.
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous
power draws may be substantially higher than the average.
Values are subject to change. See www.lexmark.com for current values.
Notices
198
Power consumption (Watts)
490, 530
N/A
N/A
45
16
0