Factory Defaults - Lexmark 280 User Manual

Menu item
Timeouts
Wait Timeout
Disabled
15–6553515
Print Recovery
Auto Continue
Disabled
5–255
Print Recovery
Jam Recovery
Auto
Print Recovery
Page Protect
Off
On

Factory Defaults

Do Not Restore
Restore Now
Custom Home Message
None
IP Address
Hostname
Contact Name
Location
Date/Time
Zero Configuration Name
Custom Text 1
Description
Sets the amount of time in seconds the printer waits for additional
data before canceling a print job
Notes:
40 seconds is the factory default setting.
•
Wait Timeout is available only when the printer is using
•
PostScript emulation. This setting has no effect on PCL
emulation print jobs.
Lets the printer automatically continue printing from certain
offline situations when not resolved within the specified time
period
Note: Disabled is the factory default setting.
Specifies whether the printer reprints jammed pages
Notes:
Auto is the factory default setting. The printer reprints
•
jammed pages unless the memory required to hold the pages
is needed for other printer tasks.
On sets the printer to always reprint jammed pages.
•
Off sets the printer to never reprint jammed pages.
•
Lets the printer successfully print a page that may not have printed
otherwise
Notes:
Off is the factory default setting. Off prints a partial page when
•
there is not enough memory to print the whole page.
On sets the printer to process the whole page so that the
•
entire page prints.
Returns the printer settings to the factory default settings
Notes:
Do Not Restore is the factory default setting. Do Not Restore
•
keeps the user-defined settings.
Restore Now returns all printer settings to the factory default
•
settings except Network/Ports menu settings. All downloads
stored in RAM are deleted. Downloads stored in flash memory
or on a printer hard disk are not affected.
Displays information pertaining to the selected Custom Home
Messages on the printer control panel display
Understanding printer menus
124