Trays / Drawers; Flash Memory Card; Hard Disk With Adapter - Lexmark 280 User Manual

C
HECK TO SEE IF THE OPTION IS CONNECTED TO THE PRINTER
1
Turn the printer off.
2
Unplug the printer.
3
Check the connection between the option and the printer.
M
AKE SURE THE OPTION IS INSTALLED
Print a menu settings page and check to see if the option is listed in the Installed Options list. If the option is not
listed, reinstall it.
M
AKE SURE THE OPTION IS AVAILABLE IN THE PRINTER DRIVER
It may be necessary to manually add the option in the printer driver to make it available for print jobs. For more
information, see "Updating available options in the printer driver" on page 38.
M
AKE SURE THE OPTION IS SELECTED
From the program you are using, select the option. Mac OS 9 users should make sure the printer is set up in the
Chooser.

Trays / Drawers

M
AKE SURE THE PAPER IS LOADED CORRECTLY
1
Open the paper tray.
2
Check for paper jams or misfeeds.
3
Make sure the paper tray closes properly.
R
ESET THE PRINTER
Turn the printer off. Wait 10 seconds. Turn the printer back on.

Flash memory card

Make sure the flash memory card is securely connected to the printer system board.

Hard disk with adapter

Make sure the hard disk is securely connected to the printer system board.
Troubleshooting
180