Internal Solutions Port; Internal Print Server; Memory Card; Usb/Parallel Interface Card - Lexmark 280 User Manual

Internal Solutions Port

If the Lexmark Internal Solutions Port (ISP) does not operate correctly, then these are possible solutions. Try one or
more of the following:
C ISP
HECK THE CONNECTIONS
Make sure the ISP is securely attached to the printer system board.
•
Make sure the cable is securely connected to the correct connector.
•
C
HECK THE CABLE
Make sure you are using the correct cable and that it is securely connected.
M
AKE SURE THE NETWORK SOFTWARE IS CONFIGURED CORRECTLY
For information about installing software for network printing, see the Networking Guide on the Software and
Documentation CD

Internal print server

If the internal print server does not operate correctly, these are possible solutions. Try one or more of the following:
C
HECK THE PRINT SERVER CONNECTIONS
Make sure the internal print server is attached securely to the printer system board.
•
Make sure you are using the correct (optional) cable and that it is securely connected.
•
M
AKE SURE THE NETWORK SOFTWARE IS CONFIGURED CORRECTLY
For information about installing software for network printing, click Additional on the Software and
Documentation CD, and then select the Networking Guide link under Publications on this CD.

Memory card

Make sure the memory card is securely connected to the printer system board.

USB/parallel interface card

Check the USB/parallel interface card connections:
Make sure the USB/parallel interface card is securely connected to the printer system board.
•
Make sure you are using the correct cable and that it is securely connected.
•
Troubleshooting
181