Network Reports Menu - Lexmark 280 User Manual

Menu item
Job Buffering
Off
On
Auto
Mac Binary PS
On
Off
Auto
Std Network Setup
Reports or Network Reports
Network Card
TCP/IP
IPv6
AppleTalk
NetWare
LexLink
Net <x> Setup
Reports or Network Reports
Network Card
TCP/IP
IPv6
Wireless
AppleTalk
NetWare
LexLink

Network Reports menu

This menu is available from the Network/Ports menu:
Description
Temporarily stores jobs on the printer hard disk before printing. This menu only
appears if a formatted disk is installed.
Notes:
Off is the factory default setting.
•
The On value buffers jobs on the printer hard disk. This menu selection appears
•
only when a formatted disk is installed and is not defective.
The Auto setting buffers print jobs only if the printer is busy processing data
•
from another input port.
Changing this setting from the printer control panel and then exiting the
•
menus causes the printer to restart. The menu selection is updated.
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
Auto is the factory default setting.
•
The Off setting filters print jobs using the standard protocol.
•
The On setting processes raw binary PostScript print jobs.
•
For descriptions and settings of the network setup menus, see the following:
"Network Reports menu" on page 105
•
"Network Card menu" on page 106
•
"TCP/IP menu" on page 106
•
"IPv6 menu" on page 107
•
"Wireless menu" on page 108
•
"AppleTalk menu" on page 108
•
"NetWare menu" on page 109
•
"LexLink menu" on page 110
•
Note: The Wireless menu appears only when the printer is connected to a wireless
network.
Understanding printer menus
105