Understanding the printer menus
Reports menu
Reports menu
Use
Menu Settings Page
Device Statistics
Stapler Test
Network Setup Page
Network [x] Setup Page
Profiles List
Print Fonts
PCL Fonts
PostScript Fonts
Print Directory
Asset Report
To
Print a report containing information about the paper loaded in trays,
installed memory, total page count, alarms, timeouts, printer control panel
language, TCP/IP address, status of supplies, status of the network
connection, and other information.
Print a report containing printer statistics such as supply information and
details about printed pages.
Print a report that confirms that the staple finisher is functioning properly.
Note: This menu appears only if an optional staple finisher is installed.
Print a report containing information about the network printer settings, such
as the TCP/IP address information.
Note: This menu item appears only in network printers or in printers
connected to print servers.
Print a report containing information about the network printer settings, such
as the TCP/IP address information.
Notes:
•
This menu item is available only when more than one network option
is installed.
•
This menu item appears only in network printers or in printers
connected to print servers.
Print a list of profiles stored in the printer.
Note: This menu item appears only when LDSS is enabled.
Print a report of all the fonts available for the printer language currently set
in the printer.
Note: A separate list is available for PCL and PostScript emulations.
Print a list of all the resources stored in an optional flash memory card or
printer hard disk.
Notes:
•
Job Buffer Size must be set to 100%.
•
Make sure the optional flash memory or printer hard disk is installed
correctly and working properly.
•
This menu item appears only when an optional flash drive or printer
hard disk is installed.
Print a report containing printer asset information, such as serial number
and model name.
91