Understanding the printer menus
Menu item
Feed Direction
Short Edge
Long Edge
Reports menu
Reports menu
Menu item
Menu Settings Page
Device Statistics
Network Setup Page
Network [x] Setup Page
Profiles List
Print Fonts
PCL Fonts
PostScript Fonts
Print Directory
Asset Report
Description
Specifies the feed direction
Notes:
•
Short Edge is the factory default setting.
•
Long Edge appears only if the longest edge is shorter than the
maximum width supported by the tray.
Description
Prints a report containing information about the paper loaded into trays, installed
memory, total page count, alarms, timeouts, printer control panel language,
TCP/IP address, status of supplies, status of the network connection, and other
information
Prints a report containing printer statistics such as supply information and details
about printed pages
Prints a report containing information about the network printer settings, such
as the TCP/IP address information
Note: This menu item appears only in network printers or in printers connected
to print servers.
Prints a report containing information about the network printer settings, such
as the TCP/IP address information
Notes:
•
This selection is available when more than one network option is installed.
•
This menu item appears only in network printers or in printers connected
to print servers.
Prints a list of profiles stored in the printer
Prints a report of all the fonts available for the printer language currently set in
the printer
Note: A separate list is available for PCL and PostScript emulations.
Prints a list of all the resources stored on an optional flash memory card or printer
hard disk
Note: Make sure the optional flash memory or printer hard disk is installed
correctly and working properly.
Prints a report containing printer asset information, such as serial number and
model name
Note: The report contains text and UPC barcodes that can be scanned into an
asset database.
99