Understanding the printer menus
Use
Feed Direction
Short Edge
Long Edge
Reports menu
Reports menu
Use
Menu Settings Page
Device Statistics
Network Setup Page
Network [x] Setup Page
Profiles List
Print Fonts
PCL Fonts
PostScript Fonts
Print Defects Guide
Print Demo
Demo Page
[list of available demo pages]
To
Specify the feed direction if the paper can be loaded in either
direction.
Notes:
•
Short Edge is the factory default setting.
•
Long Edge appears only when the longest edge is shorter than
the maximum width supported in the tray.
To
Print a report containing information about paper loaded in trays, installed
memory, the total page count, alarms, timeouts, the printer control panel
language, the TCP/IP address, the status of supplies, the status of the
network connection, and other information.
Print a report containing printer statistics such as supply information and
details about printed pages.
Print a report containing information about the network printer settings, such
as the TCP/IP address.
Note: This menu appears only in network printers or printers connected
to print servers.
Print a report containing information on network printer settings, such as
the TCP/IP address information.
Notes:
•
This menu item is available only when more than one network option
is installed.
•
This menu item appears only in network printers or in printers
connected to print servers.
Print a list of profiles stored in the printer.
Print a report in English of all the fonts available for the printer language
currently set in the printer.
Note: A separate list is available for PCL and PostScript emulations. Each
emulation report contains print samples and information about the
available fonts for each language.
Print a report containing information about repeating print defects.
Print demo files that are available in the RIP code, the flash option, and the
disk option.
60