Netware Menu - Lexmark 280 User Manual

Network/Ports ª Standard Network or Network <x> ª Std Network Setup or Net <x> Setup ª AppleTalk
Menu item
Activate
On
Off
View Name
View Address
Set Zone
<list of zones available on the
network>

NetWare menu

This menu is available from the Network/Ports menu:
Network/Ports ª Standard Network or Network <x> ª Std Network Setup or Net <x> Setup ª NetWare
Menu item
Activate
Yes
No
View Login Name
Print Mode
Network Number
Select SAP Frames
Ethernet 802.2
Ethernet 802.3
Ethernet Type II
Ethernet SNAP
Packet Burst
Yes
No
NSQ/GSQ Mode
Yes
No
Description
Activates AppleTalk support
Note: On is the factory default setting.
Shows the assigned AppleTalk name
Note: The name can be changed only from the Embedded Web Server.
Shows the assigned AppleTalk address
Note: The address can be changed only from the Embedded Web Server.
Provides a list of AppleTalk zones available on the network
Note: The default setting is the default zone for the network. If no default zone
exists, the zone marked with an * is the default setting.
Description
Activates NetWare support
Note: No is the factory default setting.
Lets you view the assigned NetWare login name
Note: This can be changed only from the Embedded Web Server.
Lets you view the assigned NetWare print mode
Note: This can be changed only from the Embedded Web Server.
Lets you view the assigned NetWare network number
Note: This can be changed only from the Embedded Web Server.
Enables the Ethernet frame type setting
Note: On is the factory default setting for all menu items.
Reduces network traffic by allowing the transfer and acknowledgement of
multiple data packets to and from the NetWare server
Note: Yes is the factory default setting.
Specifies the NSQ/GSQ Mode setting
Note: Yes is the factory default setting.
Understanding printer menus
109