Lexmark 280 User Manual page 111

Menu item
USB Buffer
Disabled
Auto
3k to <maximum size allowed>
Job Buffering
On
Off
Auto
Mac Binary PS
On
Off
Auto
ENA Address
ENA Netmask
ENA Gateway
Description
Sets the size of the USB input buffer
Notes:
Auto is the factory default setting.
•
The Disabled setting turns off job buffering. Any jobs already buffered on the
•
disk are printed before normal processing is resumed.
The USB buffer size value can be changed in 1k increments.
•
The maximum size allowed depends on the amount of memory in the printer,
•
the size of the other link buffers, and whether the Resource Save setting is On
or Off.
To increase the maximum size range for the USB Buffer, disable or reduce the
•
size of the parallel, serial, and network buffers.
Changing this setting from the control panel and then exiting the menus causes
•
the printer to restart. The menu selection is updated.
Temporarily stores jobs on the printer hard disk before printing
Notes:
Off is the factory default setting.
•
The On setting buffers jobs on the printer hard disk.
•
The Auto setting buffers print jobs only if the printer is busy processing data
•
from another input port.
Changing this setting from the control panel and then exiting the menus causes
•
the printer to restart. The menu selection is updated.
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
Auto is the factory default setting.
•
The Off setting filters print jobs using the standard protocol.
•
The On setting processes raw binary PostScript print jobs.
•
Sets the network address information for an external print server that is attached to
the printer using a USB cable
Note: This menu item is available only if the printer is attached to an external print
server through the USB port.
Sets the netmask information for an external print server that is attached to the
printer using a USB cable
Note: This menu item is available only if the printer is attached to an external print
server through the USB port.
Sets the gateway information for an external print server that is attached to the
printer using a USB cable
Note: This menu item is available only if the printer is attached to an external print
server through the USB port.
Understanding printer menus
111