Or 201 Paper Jam - Lexmark 280 User Manual

200 or 201 paper jam

If paper jams under the photoconductor units, 200.xx Paper jam or 201.xx Paper jam may appear.
1
Open the front door.
Note: To avoid overexposing the photoconductor units, do not leave the front door open longer than 10 minutes.
2
Pull the paper forward if it is lodged under the photoconductor units.
Note: You may need to remove the photoconductor units if the paper is lodged too tightly under them.
3
Remove each photoconductor unit, and place it on a flat surface.
4
Remove the jammed paper, and then replace each photoconductor unit.
5
Close the front door.
6
Press from the printer control panel.
Clearing jams
82