Sensor (Media Out) Removal; Media Out Actuator Removal - Lexmark X940e Service Manual

7510-XXX

Sensor (media out) removal

1. Remove the printer left lower door assembly. See
2. Remove the media feed unit assembly. See
3. Remove the media feed unit assembly. See
4. Remove the media out actuator. See
5. Disconnect the connector from the sensor (media out) (A).
6. Release the hooks securing the sensor (media out) (A) to the media feed unit.
7. Remove the sensor (media out) (A).

Media out actuator removal

1. Remove the media feed unit assembly. See
2. Remove the media feed unit assembly. See
3. Release the two bosses on the media out actuator (A) from the media feed unit assembly.
4-22
MFP Service Manual
"Printer left lower door assembly removal" on page
"Media feed unit assembly 1 removal" on page
"Media feed lift motor removal" on page
"Media out actuator removal" on page
Front
Harness
A
Hook
Hooks
Lower view
"Media feed unit assembly 1 removal" on page
"Media feed lift motor removal" on page
4-21.
4-110.
4-22.
4-21.
4-110.
4-8.