Fax/Modem Configuration Id Mismatch; Hard Drive/Configuration Id Mismatch - Lexmark X940e Service Manual

7510-XXX

848.00 Fax/modem configuration ID mismatch

Step
1 Check the fax interface card assembly (modem) connection.
Is the fax interface card assembly (modem) connected
properly?
2 Perform a POR.
Does the error remain when the power is turned off/on again?

849.00 Hard drive/configuration ID mismatch

Step
1 Check the hard drive data and power connections.
Are the above connections connected properly?
2 Perform a POR.
Does the error remain when the power is turned off/on again?
900.XX RIP card assembly software error
Step
1 Perform a POR.
Does the error occur when the power is turned off/on?
2-128
MFP Service Manual
Check
Check
Check
Yes
Replace the fax Replace the
interface card connection.
assembly
(modem) and
properly set
configuration ID.
Go to "Fax
interface card
(modem)
assembly
removal" on
page 4-72.
Go to
"Configuration
ID" on
page 3-19.
Replace the RIP Problem solved.
card assembly.
Go to "RIP card
assembly
removal" on
page 4-71.
Yes
Replace the Replace the
hard drive. connections.
Go to "Hard
drive removal"
on page 4-72.
Replace the RIP Problem solved.
card assembly.
Go to "RIP card
assembly
removal" on
page 4-71.
Yes
Go to step 2. Perform several
print tests.
If the problem
remains, go to
step 2.
No
No
No