Lexmark X940e Service Manual page 135

Error code or
message
80 100K maintenance required
Scheduled
maintenance
100K kit
80 600K maintenance required
Scheduled
maintenance
600K kit
80 ADF maintenance required
Scheduled
maintenance
ADF kit
82 Waste toner cartridge full
Replace waste
toner
82 Waste toner cartridge not
detected
Waste toner
missing
82 Waste toner cartridge nearly
full
Waste toner
nearly full
84 (Color) PC cartridge not
detected
(color) PC unit
missing
841.00 Image pipeline ASIC error
Service image
pipeline
842.00 Scanner communication error
Service
scanner failure
842.01 Scanner communication error
Service
scanner failure
842.02 Scanner communication error
Service
scanner failure
842.03 Scanner communication error
Service
scanner failure
Error contents Description/Action
Service is required to maintain printer performance.
Go to "100K maintenance required" on
page 2-174.
Service is required to maintain printer performance.
Go to "600K maintenance required" on
page 2-174.
Service is required to maintain printer performance.
Go to "ADF maintenance required" on
page 2-175.
Replace the waste toner cartridge.
"Waste toner cartridge full" on page
Go to
Reinstall the waste toner cartridge.
Go to "Waste toner cartridge not detected" on
page 2-178.
Waste toner cartridge is nearing the replacement
interval.
Go to "Waste toner cartridge nearly full" on
page 2-179.
A (color) PC cartridge is not installed or not installed
properly.
Go to "<Color> PC cartridge not detected" on
page 2-180.
The image pipeline for processing the data that
comes from the scanner, prior to being printed, has
failed.
Go to "Black toner cartridge detection error
841.00 Image pipeline ASIC error" on
page 2-106.
Controller detected a communication error.
Communication timeout
Go to "842.00 Scanner communication error" on
page 2-107.
Controller detected a communication error packet
timeout.
Go to "842.01 Scanner communication error" on
page 2-108.
Controller detected a communication error. Invalid
message checksum
Go to "842.02 Scanner communication error" on
page 2-108.
Controller detected a communication error. Invalid
message parameter(s)
Go to "842.03 Scanner communication error" on
page 2-109.
Diagnostic information
7510-XXX
2-178.
2-21