Lexmark X940e Service Manual page 443

13. While holding the four developer unit assemblies firmly inside the machine, gently remove the developer interlock
plate assembly (A).
14. Remove the developer interlock plate assembly (A) and allow it to gently hang down by the harness if removing
the developer units. If removing the developer interlock plate assembly (A) from the machine, goes to step 15.
15. Remove the screw securing the harness cover (B) to the machine.
16. Remove the harness cover (B).
17. Disconnect the connector from the developer interlock plate assembly (A).
7510-XXX
4-51
Repair information