Booklet Fold Adjust; Finisher Config - Lexmark X940e Service Manual

Press Stop

Booklet Fold Adjust

To perform the Booklet Fold Adjust Test:
1. Select Booklet Fold Adjust from the Diagnostics Menu.
The following tests appear on the LCD
Select the following:
Booklet Tamper Shift Adjust
Booklet Compile position
Booklet 2-sheet
Booklet 15-sheet
Booklet Fold Pos Fine Adj
Booklet Staple Pos Fine Adj

Finisher Config

To perform Finisher Config:
1. Select Finisher Config from the Diagnostics Menu.
Finisher Config values appear on the LCD. If required, reset the values and submit
to return to ENGINE ADJUST.
Appears on the LCD:
Booklet Staple Fold Fine Adjust values appear
on the LCD. If required, reset the values and
submit.
Booklet Compile position values appear on the
LCD. If required, reset the values and submit.
Booklet 2-sheet values appear on the LCD. If
required reset the values and submit.
Booklet 15-sheet values appear on the LCD. If
required reset the values and submit.
Booklet Staple Fold Fine Adjust values appear
on the LCD. If required, reset the values and
submit.
Booklet Staple Fold Fine Adjust values appear
on the LCD. If required, reset the values and
submit.
7510-XXX
3-29
Diagnostic aids