Upper Printer Engine Card Bracket Assembly Removal - Lexmark X940e Service Manual

Upper printer engine card bracket assembly removal

1. Remove the rear cover assembly. See
2. Remove the right cover assembly. See
3. Remove the top cover assembly. See
4. Remove the RIP card assembly. See
5. Remove the controller box top cover assembly. See
page 4-67.
6. Remove the switch (main power). See
7. Remove the controller box assembly. See
8. Disconnect the thirteen connectors from the upper printer engine card assembly (A).
9. Release the harnesses from the clamps.
10. Remove the four screws securing the upper printer engine card bracket assembly (A) to the machine.
Note: When removing the upper printer engine card bracket assembly (A), the upper printer engine card
assembly (B) and the lower printer engine card assembly (C) will become detached.
11. Lift the upper printer engine card bracket assembly (A).
12. Remove the upper printer engine card bracket assembly (A).
"Rear cover assembly removal" on page
"Right cover assembly removal" on page 4-4
"Top cover assembly removal" on page
"RIP card assembly removal" on page
"RIP card cooling fan cover assembly removal" on
"Switch (main power) removal" on page
"Controller box assembly removal" on page
7510-XXX
4-5.
4-4.
4-71.
4-69.
4-68.
4-73
Repair information