A/V Set Menu; Video Set Item - JVC GY-HM200U Instruction Manual

A/V Set Menu

Menu screen for video output and audio.
Video Set...
For specifying video output-related settings.
(A P109 [Video Set Item] )
Audio Set...
For specifying audio-related settings.
(A P110 [Audio Set Item] )

Video Set Item

Display On TV
For setting whether to display the display and menu
characters on the external monitor.
[Setting Values: On, ROff]
HDMI/SDI Out K
For setting the terminal to output the video.
[Setting Values: HDMI+SDI, SDI, HDMI, ROff]
9 Resolution K
For selecting the resolution of video output from the
[HDMI] terminal or [SDI OUT] terminal according to
the monitor to be connected.
[Setting Values: 576i, 576p, 480i, 480p, 720p,
1080i, 1080p, 2160/24p, 2160/25p, 2160/30p]
Memo :
The selectable options vary according to the
0
setting in [System]/[WResolution] and [WFrame
Rate] of [System] B [Record Set] B [Record
Format].
Cross conversion output is not possible.
0
This item cannot be specified when HDMI/SDI
0
Out is set to "Off".
9 HDMI Color K
For setting the color format of HDMI signals.
0
This item is selectable when [HDMI/SDI Out] is
0
set to "HDMI" or "HDMI+SDI".
[Setting Values: RGB, RAuto]
9 HDMI Enhance K
For setting the color range of HDMI signals.
0
When connecting to a PC monitor, set this to
"On".
This item is selectable when [HDMI/SDI Out] is
0
set to "HDMI" or "HDMI+SDI".
[Setting Values: On, ROff]
9 SDI Rec Trigger K
For setting whether to superimpose trigger signals
in tandem with the [SDI OUT] terminal as well as
the [REC] button on the camera body.
If "On" is specified, it is possible to record on a
device equipped with SDI record trigger in tandem
with the operation of the [REC] button.
When a compatible device is connected,
recording/stop control signals are output in tandem
with the operation of the [REC] button.
The SDI record trigger output status to the
connected device is indicated by REC B/STBY B
on the display screen.
[Setting Values: On, ROff]
Memo :
Even if REC B/STBYB is displayed on the
0
display screen, the compatible device may not
necessarily be recording.
HDMI Out M
For setting whether to output the HDMI signal.
[Setting Values: On, ROff]
9 Resolution M
For selecting the resolution of video output from the
[HDMI] terminal according to the monitor to be
connected.
[Setting Values: 576i, 576p, 480i, 480p, 720p,
1080i, 1080p, 2160/24p, 2160/25p, 2160/30p]
Memo :
The selectable options vary according to the
0
setting in [System]/[WResolution] and [WFrame
Rate] of [System] B [Record Set] B [Record
Format].
Cross conversion output is not possible.
0
9 HDMI Color M
For setting the color format of HDMI signals.
0
This item is selectable when [HDMI Out] is set
0
to "On".
[Setting Values: RGB, RAuto]
9 HDMI Enhance M
For setting the color range of HDMI signals.
0
When connecting to a PC monitor, set this to
"On".
This item is selectable when [HDMI Out] is set
0
to "On".
[Setting Values: On, ROff]
109
A/V Set Menu