A/V Set Menu; Video Set Item - JVC Connected Cam GY-HC900CHU Instructions Manual

A/V Set Menu

Menu screen for video output and audio.
Video Set...
For specifying video output-related settings.
(A P131 [Video Set Item] )
Audio Set...
For specifying audio-related settings.
(A P135 [Audio Set Item] )

Video Set Item

SDI OUT2 Char.
For configuring whether to show the display and
menu on the [HD/SD SDI OUT2] terminal.
[Setting Values: On, ROff]
Memo :
When "VF" is selected for [SDI OUT2], the
0
setting is fixed at "On".
HDMI Char.
For configuring whether to show the display and
menu on the [HDMI] terminal.
[Setting Values: On, ROff]
Memo :
When "VF" is selected for [HDMI OUT], the
0
setting is fixed at "On".
Video OUT Char.
For configuring whether to show the display and
menu on the [VIDEO OUT] terminal.
[Setting Values: On, ROff]
SDI OUT1 Res.
For selecting the resolution of video output from the
[HD/SD SDI OUT1] terminal according to the
monitor to be connected.
[Setting Values: 1080psF, 1080p, R1080i, 720p,
576i, 480i]
Memo :
The selectable options vary according to the
0
setting in [System]/[WResolution] and [WFrame
Rate] of [System] B[Record Set] B [Record
Format].
Cross conversion output is not possible.
0
When [A/V Set] B [Video Set] B [SDI OUT1
0
Res.] is set to "1080p", configuring [System] B
[GPS] to "On" changes the setting to "1080i".
u v
SDI OUT2/HDMI Res.
For configuring the resolution of the video output
from the [HD/SD SDI OUT2] and [HDMI] terminals
according to the monitor to be connected.
[Setting Values: 1080psF/i, 1080p, R1080i, 720p,
576p(HDMI only), 576i, 480p(HDMI only), 480i]
Memo :
The selectable options vary according to the
0
setting in [System]/[WResolution] and [WFrame
Rate] of [System] B [Record Set] B [Record
Format].
Cross conversion output is not possible.
0
When "VF" is selected for [SDI OUT2], signal is
0
output from the [HD/SD SDI OUT 2] terminal at
1080p.
When "VF" is selected for [HDMI OUT], signal is
0
output from the [HDMI] terminal at 1080p.
SDI OUT1
For configuring video output from the [HD/SD SDI
OUT1] terminal.
[Setting Values: On, ROff]
Memo :
When a resolution with no SDI output is
0
selected, the setting is fixed at "Off".
This item needs to be configured to "On" even
0
during SDI OUT1 output from the expansion unit
terminal (68-pin) at the back.
131
A/V Set Menu