Table of Contents
Advertisement
4 Press the Set button (R) after confirming
the exit screen.
The [Initial Setting] screen appears.
For U models
0
Initial Setting
UTC-05:00
Set
.
For E models
0
Initial Setting
UTC
Set
.
Memo :
The [Initial Setting] screen appears when the
0
power is turned on for the first time and when the
power is turned on after the built-in battery is fully
discharged.
The configured date/time data is saved in the
0
built-in rechargeable battery even if the power is
turned off.
5 Set the time zone and date/time.
A Move the cursor with the cross-shaped button
(HI) and select the setting item.
B Change the values with the cross-shaped
button (JK).
6 Press the Set button (R) after setting is
complete.
The clock is set to 0 seconds of the input date/
time.
Memo :
The configured date/time data can be displayed
0
on the LCD monitor and viewfinder and be
recorded to the SD card.
The value of the year can be set in the range of
0
“2000” to “2099”.
Initial Settings
Changing the Time after Initial Setting
Setting the Date/Time
(A P114 [ Date/Time ] )
1 Select [System] B [Date/Time].
The [Date/Time] screen appears.
2 Set the date and time.
A Move the cursor with the cross-shaped button
(HI) and select the setting item.
B Change the values with the cross-shaped
button (JK).
3 Press the Set button (R) after setting is
complete.
The clock is set to 0 seconds of the input date/
time.
Changing the Display Style
You can change the display style of the date/time
on the menu.
Setting the Date Display (Date Style)
(A P108 [ Date Style ] )
The date display can be changed in [LCD/VF] B
[Display Settings] B [Date Style].
Setting the Time Display (Time Style)
(A P108 [ Time Style ] )
The time display can be changed in [LCD/VF] B
[Display Settings] B [Time Style].
Date/Time Display in Each Operation
Mode
During Camera mode:
Date/time of the built-in clock is displayed.
During Media mode:
Shooting date/time of the clip being played back is
displayed.
Page 34
Advertisement
Table of Contents
