Table of Contents
Advertisement
A/V Set Menu
Menu screen for video output and audio.
Video Set...
For specifying video output-related settings.
(A P125 [Video Set Item] )
Audio Set...
For specifying audio-related settings.
(A P127 [Audio Set Item] )
Video Set Item
HDMI/SDI Out
For setting the terminal to output the video.
[Setting Values: HDMI+SDI, SDI, HDMI, ROff]
Memo :
When the [Network] setting is set to "On(SDI
0
Off)", "HDMI+SDI" and "SDI" are not selectable.
And when "On(HDMI Off)" is set, "HDMI+SDI"
and "HDMI" are not selectable.
When KA-M790G (Multicore Remote Adapter:
0
optional) is connected to the rear of the camera
recorder and power is supplied from the 26-pin
camera cable, "HDMI+SDI" is not selectable.
A B
9 Resolution
For selecting the resolution of video output from the
[HDMI]/[SDI] terminal according to the monitor to
be connected.
[Setting Values: 576i, 576p, 480i, 480p, 720p,
R1080i, 1080p]
Memo :
The selectable options vary according to the
0
setting in [System]/[WResolution]/[WFrame &
Bit Rate] of [System] B [Record Set] B [Record
Format].
Cross conversion output is not possible.
0
When [GPS] is set to "On", and [HDMI/SDI Out]
0
is set to "HDMI+SDI" or "SDI", "1080p" is not
selectable. l
9 HDMI Color
For setting the color format of HDMI signals.
0
This item is selectable only when [HDMI/SDI
0
Out] is set to "HDMI" or "HDMI+SDI".
[Setting Values: RGB, RAuto]
9 HDMI Enhance
For setting the color range of HDMI signals.
0
When connecting to a PC monitor, set this to
"On".
This item is selectable only when [HDMI/SDI
0
Out] is set to "HDMI" or "HDMI+SDI".
[Setting Values: On, ROff]
9 SDI Rec Trigger
For setting whether to superimpose trigger signals
in tandem with the [HD/SD SDI OUT] terminal as
well as the [REC] button on the camera body.
When a compatible device is connected,
recording/stop control signals are output in tandem
with the operation of the [REC] button.
[Setting Values: On, ROff]
SD Aspect
For setting the style of displaying down-converted
images on a 4:3 aspect ratio screen.
Side Cut:
0
Displays image with the left and right sides cut
off.
Letter:
0
Displays as a wide image with the top and
bottom blackened.
Squeeze:
0
Displays image that is squeezed horizontally.
[Setting Values: Side Cut, Letter, RSqueeze]
Memo :
When [Record Format] B [System] is set to "SD"
0
or "SD(SDI In)", and when [SD Aspect] is set to
"4:3", this item appears as "---" and cannot be
selected.
(A P132 [ System ] )
When [Record Format] B [System] is set to
0
"SD", and [SD Aspect] is set to "16:9", "Side Cut"
in [A/V Set] B [Video Set] B [SD Aspect] cannot
be selected.
(A P125 [ SD Aspect ] )
(A P132 [ System ] )
A/V Set Menu
125
Advertisement
Table of Contents
