Lcd/Vf Menu - JVC GY-HM200U Instruction Manual

9 Preset
For setting the user's bit. (Digit by digit)
Display : AB CD EF 01
(A P71 [Presetting the User's Bit] )
Memo :
When [UB Mode] is set to "Date" or "Time", this
0
item appears as "---" and preset is disabled.
Drop Frame
For setting the framing mode of the time code
generator.
Non Drop:
0
Internal time code generator works in the non-
drop-frame mode. Use this setting when placing
emphasis on the number of frames.
Drop:
0
Internal time code generator works in the drop-
frame mode. Use this setting when placing
emphasis on the recording time.
[Setting Values: Non Drop, RDrop]
Memo :
This item can be set only when [Main Menu] B
0
[System] B [Record Set] B [Record Format] B
[WFrame Rate] is set to "60p", "30p", or "60i".
When [Frame Rate] is "24p", "Non Drop"
becomes fixed and cannot be selected. When
[Frame Rate] is "50p", "25p", or "50i", this item
appears as "---" and cannot be selected.
(A P115 [ W Frame Rate ] )
104
TC/UB Menu

LCD/VF Menu

Item for specifying settings related to the LCD
monitor or viewfinder screen.
This menu screen can be used to specify settings
related to the Focus Assist mode, zebra pattern
display, screen size, marker, and safety zone. In
addition, it is also used for selecting whether to
display characters on the LCD monitor or
viewfinder screen, as well as for adjusting the
picture quality of the LCD monitor.
Shooting Assist...
Menu for setting the Shooting Assist function.
(A P105 [Shooting Assist Item] )
Marker Settings...
For setting items such as the safety zone and
center mark.
(A P106 [Marker Settings Item] )
Display Settings...
For specifying display-related settings.
(A P107 [Display Settings Item] )
VF SW
For setting whether to assign the operation for
pulling out or retracting the viewfinder to the switch.
Disable:
0
A viewfinder image is displayed regardless of
the state of the viewfinder.
Enable:
0
Displays a viewfinder image only when the
viewfinder is pulled out.
[Setting Values: Disable, REnable]
Memo :
Displays a viewfinder image regardless of the
0
setting when an image is not displayed on the
LCD monitor.
(A P37 [Displays on the LCD Monitor and
Viewfinder Screen (VF)] )
VF Color
For selecting whether to display the image on the
viewfinder screen in color or black-and-white.
Select "On" to display in color, and "Off" to display
in black-and-white.
[Setting Values: ROn, Off]