Operation Lock Feature - JVC GY-HM200U Instruction Manual

Operation Lock Feature

You can use this feature to prevent erroneous
camera operation.
.
1 While in the Camera mode (when the
display screen appears), press and hold
the [CANCEL] button for 5 seconds or
longer.
The operation lock turns on, and an operation
0
lock icon (r) appears on the display
screen.
4030 20 10 0
.
Press the [CANCEL] button again for 5
0
seconds or longer to turn off the operation
lock.
Memo :
The operation lock feature is only valid in the
0
Camera mode.
(A P18 [Operation Modes] )
The power turns off and the operation lock is
0
disengaged.
The following remote operations are possible
0
even when the operation lock feature is turned
on ("On").
Remote operation from the wired remote
0
control connected to the [REMOTE] terminal.
Remote operation of the camera through
0
access via a browser on devices such as a
smartphone, tablet terminal, or PC.
00: 00: 00.00
Jan 24,2015
12 :34 :56
5 . 6f t
ND 1 /16
AE 6
+
18
dB
F1. 6
P 15000K 1/ 100
Operation lock does not apply to the following
buttons and switches.
[POWER ON/OFF] switch
0
[INPUT1]/[INPUT2] Audio input signal selection
0
switch O
[CH1]/[CH2] Audio input signal selection switch
0
O
[CH1 AUTO/MANUAL]/[CH2 AUTO/MANUAL]
0
Audio recording mode switch O
Focus ring
0
Zoom lever at the grip/Zoom lever at the handle
0
O/Zoom ring at the lens section
[ZOOM L/M/H] Zoom Speed Switch O
0
Iris Dial
0
[REC/HOLD] Record Trigger Button/Lock
0
Switch O
[REC] button (on the grip)
0
Visibility Adjustment Lever
0
User button that has been assigned with the
0
[Rec] function.
Operation Lock Feature
45