Deleting Clips - JVC GY-HM200U Instruction Manual

Time Code Playback
Time code or user's bit recorded on an SD card can
be displayed on the LCD monitor and viewfinder.
Memo :
The time code is also superimposed on the
0
video signal output from the [SDI OUT] terminal.
K
If a section without time code is played back, the
0
time code will stop. However, playback will
continue.
Displaying Information during Shooting
Pressing the [DISPLAY] button during playback
displays the display screen.
Pressing the [OIS/6] button each time changes the
shooting information displayed (camera
information display and hide display).
Camera information display displays only
0
information of Gain, Iris, Shutter and White
Balance that have been recorded.
P
Camera Information Display
.
Memo :
When [System] B [Record Set] B [Record
0
Format] B System is set to "HD+Web", only SD
or web files can be played back from slot B.
In this case, files up-converted into the HD size
are played back in the simple mode.
Trimming information is displayed while
0
trimming is in progress. In this case, pressing the
[OIS/6] button does not switch the display.
0
dB
F1.6
1/ 100
13000K

Deleting Clips

Delete clip.
.
Memo :
Clips appended with OK marks cannot be
0
deleted on the camera recorder.
Read-only clips can be deleted on a PC.
0
Deleting One Clip
Delete the clip (one clip) pointed by the cursor in
[Delete Clips] B [This Clip] in the menu.
Memo :
Clips with OK mark cannot be deleted.
0
During Thumbnail Screen
1 Move the cursor to the clip to be deleted.
Move the cursor to the clip to be deleted using
the cross-shaped button (JKH I).
218G0005 2015-01-07 07:08:43
.
2 Press the [ZEBRA/5] button.
The action selection screen is displayed.
Playing Recorded Clips
1
87