Table of Contents
Advertisement
3 Start normal recording (normal recording
into slot A)
Press any of the [REC] buttons.
0
Recording into the media in slot A starts.
0
(The characters “RREC” appear in red.)
The card icon of slot A turns red (unselected
0
state), and the status indicator of slot A blinks
in red.
Red (not selected)
00: 00: 00.00
100min
50min
Jan 24,2015
12 :34 :56
100min
50min
5 . 6f t
ND 1 /16
AE
6
+
18
dB
F1. 6
4030 20
10
0
P 15000K
1/ 100
.
4 Stop normal recording.
Press any of the [REC] buttons again.
0
Recording to slot A stops, and the card slot
0
mark of slot A turns white (unselected state).
The characters “RREC” (red) changes back
0
to “STBY” (white).
The status indicator of slot A goes out.
0
White (not selected)
00: 00: 00.00
100min
50min
Jan 24,2015
12 :34 :56
100min
50min
5 . 6f t
ND 1 /16
AE
6
+
18
dB
F1. 6
4030 20
10
0
P 15000K
1/ 100
.
5 Stop backup recording.
Select [STBY] in [Main Menu] B [System] B
0
[Record Set] B [Slot Mode] B [Backup Rec]
and press the Set button (R).
(A P117 [ Slot Mode ] )
You can also press the user button that is
0
assigned with “Backup Trig”.
(A P98 [User Switch Set Item] )
Recording to slot B stops, and the card slot
0
mark of slot B turns white (unselected state).
The characters “BACKUP” changes back to
0
white.
The status indicator of slot B lights up in
0
green.
White
00: 00: 00.00
100min
50min
Jan 24,2015
12 :34 : 56
100min
50min
5 . 6f t
ND 1 /16
AE
6
+
18
dB
F1. 6
4030 20
10
0
P 15000K
1/ 100
.
Memo :
During backup recording, if the space of one
0
card runs out, recording stops only for the card
that is full.
When recording to both slots is stopped,
0
recording in the Regen mode will be enabled for
the card slot in which recording started.
When recording is started in the other slot while
0
recording to one slot, the clip being recorded is
split and simultaneous recording to the other
card starts.
When recording is stopped for either slot A or B
0
while recording to both slots, the clip on the slot
which is still recording is split.
Although the clips are separated during
0
recording the clips can be seamlessly joined by
arranging them on the timeline of the editing
software since they are recorded seamlessly.
Clip Cutter Trig cannot be performed during
0
backup recording.
(A P82 [Splitting the Clips Freely (Clip Cutter
Trig)] )
When [Slot Mode] is set to “Backup”, [Rec
0
Mode] can only be set to “Normal”.
(A P116 [ Rec Mode ] )
Page 77
Backup Rec
Advertisement
Table of Contents
