Table of Contents
Advertisement
Error Message
Record Format Incorrect
Media Full
No Clips
No Media
No Media
No Clips
12h Continuation Record
List of FTP Transfer Errors K
If the upload of a recorded clip or download of the metadata setup file (XML format) is not successfully
completed, the following errors are displayed.
Error message
Timeout.
Media Was Removed.
Adapter Was Removed.
Cannot Connect to Server.
Status
The video format of the file for
0
Clip Review is different from the
current [WResolution],
[WFrame Rate], or [WBit Rate]
setting.
[REC] button is pressed when
0
the media in use has no
remaining space.
Remaining space ran out during
0
recording.
No viewable clips are found on the
card for Clip Review.
[REC] button is pressed when an SD
card is not inserted.
No SD card is found in Media mode
or when the thumbnail screen is
displayed.
No clips are found on the inserted
SD card in Media mode or when the
thumbnail screen is displayed.
The continuous recording time in
AVCHD mode exceeds 12 hours
and recording stops automatically.
Status
Transfer was discontinued due to
timeout caused by network
transmission or server failure.
SD card is removed while FTP
transfer is in progress.
The USB network device is
removed while FTP transfer is in
progress.
Unable to connect to the FTP server. Adjust the Server and Port settings
Action
Set [WResolution], [WFrame Rate]
and [WBit Rate] correctly.
(A P115 [ W Resolution ] )
(A P115 [ W Frame Rate ] )
(A P115 [ W Bit Rate ] )
Replace the SD card with a new
one.
Insert an SD card that contains clips
that can be reviewed.
(A P40 [SD Card] )
(A P73 [Viewing Recorded
Videos Immediately (Clip
Review)] )
Insert an SD card.
(A P40 [SD Card] )
Insert an SD card.
(A P40 [SD Card] )
Insert an SD card that contains
playable clips.
(A P40 [SD Card] )
(A P83 [Playing Recorded
Clips] )
To continue recording, press the
[REC] button again.
Action
Execute again.
0
Use a different server.
0
Insert the SD card and execute FTP
transfer again.
Connect the USB network device.
for [Metadata Server] or [Clip
Server].
(A P121 [ Metadata Server ] )
(A P122 [ Clip Server ] )
Error Messages and Actions
171
Advertisement
Table of Contents
