Table of Contents
Advertisement
FAW
For setting the position in the white balance switch
[WHT.BAL B/A/PRST] to assign the FAW (Full
Auto White Balance) function.
[Setting Values: RNone, PRST, A, B]
GAIN L/GAIN M/GAIN H
For setting the gain value of each position on the
[GAIN] selection switch.
The setting is fixed at "AGC" in the Full Auto mode.
In addition, the sensitivity setting in Lolux is used.
(A P98 [ Lolux ] )
[Setting Values: 24dB, 21dB, 18dB, 15dB, 12dB,
9dB, 6dB, 3dB, 0dB, AGC]
(Default values GAIN L: 0dB, GAIN M: 6dB, GAIN
H: 12dB)
Dynamic Zoom
For setting whether to enable the dynamic zoom
function.
Off:
0
Enables only the optical zoom (1x to 12x).
On:
0
Enables the dynamic zoom (12x to 24x) in
addition to the optical zoom.
[Setting Values: ROff, On]
Memo :
When [System] is set to "4K", this item is fixed at
0
"Off" and cannot be selected.
Handle Zoom Speed L/Handle Zoom Speed
M/Handle Zoom Speed H O
For setting the zoom speed for each position on the
[ZOOM L/M/H] zoom speed selection switch.
The larger the value the faster the zoom speed.
Selecting "Off" disables the zoom operation on the
handle.
[Setting Values: Off, 1 to 7]
(Default Values Handle Zoom Speed L: 1, Handle
Zoom Speed M: 4, Handle Zoom Speed H: 7)
Zoom Ring
For assigning the zoom or iris adjustment to the
zoom ring.
[Setting Values: RZoom, Iris]
Iris Dial
For assigning the iris, shutter or AE level
adjustment to the iris dial.
[Setting Values: RIris, Shutter, AE Level]
AF Speed
For setting the AF operation speed.
[Setting Values: Fast, RMiddle, Slow]
AF Assist
For setting whether to shift the auto focus point
when the focus ring is turned during Auto Focus
(AF).
Off:
0
Sets the AF Assist function to "Off".
Far/Near:
0
This option allows you to shift the auto focus
point to near and far directions by turning the
focus ring during AF.
Area:
0
This option allows you to shift the auto focus
point to the left, center, right, or near and far
directions by turning the focus ring during AF.
Selecting this option displays the
the area.
[Setting Values: ROff, Far/Near, Area]
(A P51 [AF Assist Function] )
Memo :
This setting is effective only when the [FOCUS]
0
switch is set to "AUTO".
The manual focus adjustment mode is
0
temporarily activated by turning the focus ring in
the AF mode. If the focus ring is not operated for
a certain time, the camera recorder returns to the
AF mode.
User Switch Set...
For specifying user button related settings.
(A P98 [User Switch Set Item] )
Camera Function Menu
icon in
97
Advertisement
Table of Contents
