Display Settings Item - JVC GY-HM200U Instruction Manual

Display Settings Item

This menu is used to set the displays on the LCD
monitor and viewfinder screen.
Zoom
For setting the display method of the zoom
position.
Number:
0
Displays the zoom position in numbers (0-99).
Bar:
0
Displays the zoom position in a bar.
Off:
0
Does not display the zoom position.
[Setting Values: Number, RBar, Off]
Focus
For setting the display method of the focal length
during manual focus.
Feet:
0
Displays the focal length in feet.
Meter:
0
Displays the focal length in meters.
Off:
0
Hides the focal length.
[Setting Values: Feet, RMeter, Off]
WB Indicator
When "On" is selected and WB is set manually, the
difference in value with the Auto WB
(recommended) is displayed as an icon on the
screen.
(Example) When 3200K is selected
<●3200K>
.............. Color temperature setting is appropriate
<▲3200K> .... Color temperature setting is higher
<▼3200K> ..... Color temperature setting is lower
[Setting Values: ROn, Off]
ND Filter
For setting whether to display the filter position.
Off:
0
Hides the filter position.
On:
0
Displays the current filter position.
On+Assist:
0
Displays the current filter position.
If the ND filter setting is inappropriate, the
appropriate ND filter to select will appear
blinking.
[Setting Values: Off, ROn, On+Assist]
Record Format
For setting whether to display the video format
during recording or playback.
[Setting Values: ROn, Off]
Media Remain
For setting whether to display the remaining space
of the recording SD card.
[Setting Values: ROn, Off]
Memo :
When the remaining space warning is
0
displayed, the information appears even when
"Off" is selected.
The displayed time is an estimate.
0
TC/UB
For specifying whether to display the time code
(TC) or user's bit (UB) rate in the display on the LCD
monitor and viewfinder screen.
[Setting Values: UB, RTC, Off]
Audio Meter
For specifying whether to display the audio level
meter on the LCD monitor and viewfinder screen.
[Setting Values: ROn, Off]
Battery
For setting the display of the remaining battery
power in the display on the LCD monitor and
viewfinder screen.
The battery information appears only on the
Display 1 screen in Camera mode.
(A P127 [Display 1 screen] )
Time:
0
Displays the remaining battery power in
minutes. (min)
Capacity%:
0
Displays the remaining battery power in
percentage. (%)
Voltage:
0
Displays the current battery voltage in units of
0.1 V. (V)
Off:
0
The remaining battery power is not displayed.
[Setting Values: RTime, Capacity%, Voltage, Off]
107
LCD/VF Menu