Table of Contents
Advertisement
Icon
FTP transfer is in progress.
Three images are alternately
displayed, and the arrows
.
become animated. In this case,
instead of the recordable time of
the SD card, an estimated value
of the remaining transfer time is
displayed.
Error has occurred during FTP
transfer.
.
(Yellow)
Memo :
This item is not displayed when [Main Menu] B
0
[LCD/VF] B [Display Settings] B [Media
Remain] is set to "Off". However, warnings will
be displayed.
(A P107 [ Media Remain ] )
Displayed on the Display 0 and Display 1
0
screens only in the case of warnings. (When the
remaining time is shorter than 3 minutes)
The icons appear on all display screens in the
following cases.
When recording is performed to only one
0
of the slots while [Main Menu] B [System]
B [Record Set] B [Slot Mode] is set to
"Dual".
(A P117 [ Slot Mode ] )
When recording is performed to only one
0
of the slots while [Main Menu] B [System]
B [Record Set] B [Record Format] B
[System] is set to "HD+Web".
(A P115 [ System ] )
The displayed time is an estimate.
0
D Resolution
Displays the video image resolution.
Memo :
This item is not displayed when [Main Menu] B
0
[LCD/VF] B [Display Settings] B [Record
Format] is set to "Off".
(A P107 [ Record Format ] )
E Frame Rate/Bit Rate
Displays the frame rate and bit rate in pairs.
Memo :
This item is not displayed when [Main Menu] B
0
[LCD/VF] B [Display Settings] B [Record
Format] is set to "Off".
(A P107 [ Record Format ] )
128
Display Screen in Camera Mode
Status
F Audio Level Meter
Displays the audio levels of CH1 and CH2.
0
The V icon appears on the screen when in
0
Manual mode.
4030 20
.
When [Main Menu] B [System] B [Record
0
Set] B [Rec Mode] is set to "Frame Rec" or
"Interval Rec", audio cannot be recorded and
the audio level meter is grayed out.
Memo :
This item is not displayed when [Main Menu] B
0
[LCD/VF] B [Display Settings] B [Audio Meter]
is set to "Off".
(A P107 [ Audio Meter ] )
G Image Stabilizer Mark
Displayed when the image stabilizer is ON.
: When [Level] of [OIS] is set to
i
"Normal".
: When [Level] of [OIS] is set to "High".
j
Memo :
If image stabilizer is set to "OFF" when the
0
Display 0 screen is displayed, h appears for 3
seconds.
Displayed in the Display 0 screen only when
0
there is a change.
H Volume Operation Indicator
The display appears when the volume (0 to 15)
of the headphone or speaker changes.
.
Memo :
There is no audio output from the speaker in
0
Camera mode.
I FULL AUTO ON/OFF
Press and hold the [FULL AUTO] button to
switch on or off.
If FULL AUTO is enabled, the v icon appears.
10
0
0
12
Advertisement
Table of Contents
