Table of Contents
Advertisement
A/V Set Menu
Menu screen for video output and audio.
Video Set...
For specifying video output-related settings.
(A P100 [Video Set Item] )
Audio Set...
For specifying audio-related settings.
(A P101 [Audio Set Item] )
Video Set Item
Display On TV
For setting whether to display the display and menu
characters on the external monitor.
[Setting Values: On, ROff]
HDMI out
For setting the terminal to output the video.
[Setting Values: On, ROff]
9 Resolution
For selecting the resolution of video output from the
[HDMI] terminal according to the monitor to be
connected.
[Setting Values: 576i, 576p, 480i, 480p, 720p,
R1080i, 1080p]
Memo :
The selectable options vary according to the
0
setting in [System]/[Resolution]/[Frame & Bit
Rate] of [System] B [Record Set] B [Record
Format].
Cross conversion output is not possible.
0
9 Color
For setting the color format of HDMI signals.
0
This item can be set only when [HDMI out] is set
0
to "On".
[Setting Values: RGB, RAuto]
9 Enhance
For setting the color range of HDMI signals.
0
When connecting to a PC monitor, set this to
"On".
This item can be set only when [HDMI out] is set
0
to "On".
[Setting Values: On, ROff]
100
A/V Set Menu
9 Rec Trigger
For setting whether to superimpose trigger signals
in tandem with the [HDMI] terminal as well as the
[REC] button on the camera body.
When a compatible device is connected,
recording/stop control signals are output in tandem
with the operation of the [REC] button.
The record trigger output status to the connected
device is indicated by REC B/STBYB on the
display screen.
On:
0
Superimposes the trigger signals in tandem with
the [HDMI] terminal as well as the [REC] button
on the camera body and outputs the recording/
stop control signals to the compatible device.
Off:
0
Does not superimpose the trigger signals.
[Setting Values: On, ROff]
Memo :
Even if REC B/STBYB is displayed on the
0
display screen, the compatible device may not
necessarily be recording.
When [Main Menu] B [A/V Set] B [Video Set] B
0
[HDMI out] is set to "Off", [Rec Trigger] is fixed
at "Off" and cannot be selected.
When [Main Menu] B [System] B [Record Set]
0
B [Rec Mode] is set to "Interval Rec" or "Frame
Rec", [Rec Trigger] is fixed at "Off" and cannot
be selected.
Set to "Off" if connecting to a device that does
0
not support record trigger.
9 TC
For setting whether to superimpose time code to
the [HDMI] terminal.
[Setting Values: On, ROff]
Memo :
Set to "Off" if connecting to a device that does
0
not support HDMI TC.
Advertisement
Table of Contents
