Table of Contents
Advertisement
INSTRUMENTS & OPERATION
abnormal. In this case, please stop the vehicle
immediately to avoid damage to the engine..
5� Coolant temperature warning
light
This indicator lights up when the coolant temperature
is too high. Stop the vehicle and allow the engine
to cool down. Check the cooling system including
coolant and cooling fan.
6� Rev counter
The rev counter shows the current number of the
engine.
7� Time display
The current time is displayed here.
•
Press the RESET button for 3 seconds to enter
the time setting mode (12-hour system).
•
The hour position flashes.
•
Briefly press the RESET button for hour +1.
•
Briefly press the SELECT button to switch to the
minute position.
•
Briefly press the RESET button for minute +1.
•
Briefly press the SELECT button to exit the time
setting mode.
8� Battery voltage
Briefly press the RESET button to switch between the
time and the battery voltage. If the battery symbol
lights up, the current battery voltage is displayed.
9� High beam indicator light
Illuminates when the high beam is switched on.
10� Indicator lamp
This indicator light flashes when the left or right
indicator lights are activated.
11� Odometer
Either the total odometer reading ODO or the trip
odometer reading TRIP 1 or TRIP 2 is displayed here.
Switching is possible by briefly pressing the SELECT
button. If the trip odometer reading TRIP 1 or TRIP
2 is displayed, it can be reset to zero by pressing the
RESET button for 3 seconds.
6
Mission 125 / 200
12� Speed display
The current driving speed is displayed here.
13� Select button
This key can be used to select various functions on the display.
14� RESET button
This button can be used to make various settings on
the display.
15� ABS indicator light
When you switch on the ignition, the ABS control lamp
lights up. As soon as you start driving and reach a
driving speed of approx. 5 km/h, the ABS control light
goes out. If the lamp lights up while driving, the ABS is
not working. In this case, contact your dealer.
LEFT HANDLEBAR SWITCH
1
2
1� Headlight flasher
Press the button to activate the headlight flasher.
2� Indicator
To turn right, slide the indicator switch to the right.
To turn left, slide the indicator switch to the left. To
switch off the indicator, push the switch back to the
centre position.
3� High beam and low beam
By changing the switch position, you can switch
between high beam and low beam.
4� Horn
Press the button to activate the horn.
3
4
Advertisement
Table of Contents
