Table of Contents
Advertisement
3.4
Power Cord Connection
Cable ties come as accessory items with the power cords. Use these
cable ties to secure the power plugs to your chassis.
Step 1.
Step 2.
Step 3.
Power Cord Connection
Attach the tie head (cable clamp) to a power cord by
flipping open the cable clamp and wrapping it around
the power plug. Press the clip lock on the side of the
cable clamp until it snaps into position.
Figure 3-7: Combining Cable Tie and Cable Clamp
Combine the cable clamp with the cable strap. Insert
the flat angled end of the cable strap through the small
opening on the tie head (cable clamp) with the ribbed
side facing outwards.
Figure 3-8: Combining Cable Strap and Cable Clamp
Adjust the length of cable strap through the tie head
using the release tab until the base of the push bar
anchor is aligned with the end of plug receptacle body.
Chapter 3: Subsystem Connection
3-9
Advertisement
Table of Contents
