Table of Contents
Advertisement
EonStor S12S-R/G1032 Installation and Hardware Reference Manual
1.3.4
The RAID Controller Module
PN: IFT-
PN: IFT-
The RAID controller module contains a main circuit board and an
interface faceplate. Components contained within the controller are
not user-serviceable. Except when replacing a failed controller or
upgrading/changing the DIMM module, the controller module should
never be removed or opened.
1-8
MUX kits will be necessary for directing access from
RAID controllers to individual SATA drives.
You may select
subsystem, then the MUX boards should be separately
purchased and installed.
MUX boards and MUX-enabled drive trays are separate
accessories and can be purchased separately.
NOTE:
The
S12S-G1032
accommodates both SAS and SATA-II disk drives without
the need for the MUX kits.
If SAS interface hard drives are going to be installed into the
drive trays that have MUX boards on it, the MUX boards
should be removed from the drive trays prior to hard drive
installation.
Figure 1-11: RAID Controller Module
89S10RE12
89S10GE12 (single-controller S12S-G1032)
SATA-II disk drives for a dual-controller
"single-controller"
Major Subsystem Components
enclosure
Advertisement
Table of Contents
