Table of Contents
Advertisement
EonStor S12S-R/G1032 Installation and Hardware Reference Manual
B.2
Accessories
Accessories that came included in the subsystem package.
Model Name
IFT-9011
IFT-9270ASCab
IFT-9270AYCab
IFT-
9270CmSASCab2
Accessories that can be purchased separately are listed below.
Model Name
IFT-9272CDTrayDmy
IFT-
9270CmSASCab4
IFT-9275CBTE
IFT-9270CUPSCab
IFT-9270CUPSYCab
IFT-9279CSlider36
IFT-9279S1N2S1S
IFT-9279S1DT2S1S
B-2
Description
Null modem, DB9 female to DB9 male, wires
swapped
Serial port cable for single-controller
subsystems, 1 audio jack -to- 1 DB-9
Serial port Y-cable for dual-controller
subsystems, 2 audio jacks -to- 1 DB-9
SAS external, Mini SAS 4x to Mini SAS 4x (SFF-
8088) cable, 120cm
Table B-2: Accessories Shipped with the Subsystem
Description
Dummy Drive tray, Type-II bezel
SAS external cable, Mini-SAS 4x (SFF-8088) to
Infiniband (SFF-8470 thumbscrew type4) x,
120cm.
Battery cell pack, Li-Ion, high capacity for EonStor
ASIC400, 2U-profile series
Serial port cable to UPS device for single-
controller subsystems, 1 audio jack -to- 1 DB-9
Serial port Y-cable to UPS device for dual-
controller subsystems, 2 audio jacks -to- 1 DB-9
Enhanced
EonStor S12S-X1032 2U series subsystem, 23 to
36 inches rack depth
MUX board; for using SATA-II (3Gbps) disk drives
in a dual-controller S12S-R1032
Drive tray with a pre-installed MUX board
Table B-3: Optional Accessories
rackmount
bracket
assembly
Accessories
for
Advertisement
Table of Contents
