Table of Contents
Advertisement
1.3.3
MUX Kit
1.
2.
P/N:
The MUX kit facilitates the installation of SATA-II hard drives in the
dual-controller,
information about the MUX kits:
Major Subsystem Components
CAUTION!
The MUX kits are small, delicate components that must be
handled with care.
The MUX kits of other EonStor series models are not
compatible with the S12S-R/G1032 series. The drives trays
(that come with a MUX board mounted on them) exclusively
dedicated to the S12S-R/G1032 and S12S-J1002-R/S series
is identified by the light-green release button as shown below.
Figure 1-9: S12S-R/G1032 Series Drive Tray
Figure 1-10: MUX Kit and Drive Tray
IFT-9279S1N2S1S (MUX board)
IFT-9279S1DT2S1S (Drive tray with a pre-installed MUX
board)
S12S-R1032
Unlike the dual-ported SAS drives, if you are using
SATA-II disk drives in a dual-controller configuration,
Chapter 1: Introduction
subsystems.
Following
are
key
1-7
Advertisement
Table of Contents
