Table of Contents
Advertisement
EonStor S12S-R/G1032 Installation and Hardware Reference Manual
statuses. See Figure 4-7 for the locations of the LED indicators.
Refer to Table 4-5 for the LED definitions.
Name
Link Status
LAN Activity
4.4.5
BBU LED
Related locations of BBU LEDs are shown in the controller LED
diagram above. BBU LED definitions are shown in Table 4-6.
Color
Flashing
Amber
Static Amber
OFF
4.4.6
PSU LEDs
Each PSU comes with a single LED (see Figure 4-8) located
underneath the power switch that turns on the subsystem. This LED
indicates the operational status of the PSU. Please refer to the PSU
LED definitions shown in Table 4-7.
4-12
Figure 4-7: LAN Indicators
Color
Status
ON indicates the management port is
Green
connected to a node or networking
device.
Green
BLINKING indicates active transmission
Table 4-5: LAN Port LED Definitions
Status
The LED flashes to indicate the BBU is being
charged.
The BBU has failed.
The BBU is fully charged and is able to sustain
cached data.
Table 4-6: BBU LED Definitions
Status-indicating LEDs
Advertisement
Table of Contents
