EonStor S12S-R/G1032 Installation and Hardware Reference Manual
Power
Status
4.4.4
Controller Module LEDs
The controller faceplate is shown in Figure 4-6. Eight (8) different
types of LEDs are present and described in the following sub-
sections.
4.4.4.1 Controller Status LEDs
The controller status LEDs are numbered from 1 to 6 and are located
on the controller's rear-facing faceplate. The definitions are shown in
Table 4-3.
LED
1
Ctrl Status
2
C_Dirty
4-10
the drive.
GREEN
electrically connected in the drive tray.
Green
/ Red
RED indicates that a disk drive has failed
or is missing.
Table 4-2: Drive Tray LED Definitions
Figure 4-6: Controller LEDs
Name
Color
Green/
Amber
Amber
indicates
that
Status
GREEN indicates that the controller is
active and operating normally.
AMBER indicates the controller is
being initialized or has failed. The
controller is not ready.
ON indicates that data is currently
Status-indicating LEDs
a
drive
is