EonStor S12S-R/G1032 Installation and Hardware Reference Manual
5.2.2
Removing the Controller Module
To remove the controller module:
Step 1.
Step 2.
Step 3.
Figure 5-1: Removing the Controller Retention Screws
Step 4.
5-4
Prepare a clean, static-free work pad or container to
place the removed controller.
Disconnect all cables from the controller module.
These may include the Ethernet cable, SAS host links,
and serial cables connected to the COM ports.
Remove the screws that secure the ejection levers to
the chassis. (See Figure 5-1)
Remove the controller module by pressing down the
two (2) levers. The controller module will automatically
ease out of the controller module bay. (See Figure 5-2)
Replacing a Controller Module