Table of Contents
Advertisement
This chapter outlines some general configuration rules you should
use when configuring a storage system and introduces basic
information about SAS cabling and topologies for the S12S
enclosures. You can refer to these topologies or use them as a guide
for developing your own topologies.
3.1
Host Connection Prerequisites
The Host Link Cables
One (for single-controller) or two (for dual-controller configuration)
120cm Mini-SAS-to-Mini-SAS host link cables are included. You
need to purchase other cables if you need more than the included
cables. Shown below are some details of the included SAS external
cable:
Infortrend's part numbers for cables of different lengths and different
connectors are:
Host Connection Prerequisites
Subsystem Connection
Figure 3-1: SAS Cable Drawing
Chapter 3
3-1
Advertisement
Table of Contents
