Table of Contents
Advertisement
1.3.1
LCD keypad Panel
LCD Panel
Figure 1-5: Opening the Front Handle
The LCD panel shown in Figure 1-5 consists of a 16 characters x 2
rows LCD screen with push buttons, a mute button, and LED status
indicators. The LCD front panel provides full access to all array
configurations and monitoring options. After powering up the
subsystem, the initial screen will show the subsystem model name. A
different name can be manually assigned to the subsystem or to
different RAID arrays. This enables easier identification in a topology
consisting of numerous arrays.
Figure 1-6: Front Panel Retention Latch
To access drive bays in the left- or right-hand side column, first
release the retention latches by pushing them outwards (see Figure
1-6), and then swing the forearm handles to the sides. To close the
handles, swing the forearm handles towards the center; gently press
the handles until a click sound is heard. The latches will lock the
handles in place.
Major Subsystem Components
Chapter 1: Introduction
1-5
Advertisement
Table of Contents
