Table of Contents
Advertisement
EonStor S12S-R/G1032 Installation and Hardware Reference Manual
in the event of single power supply failure. The modular nature of the
subsystem and the easy accessibility to all major components
ensure that faults can be corrected online, within a few seconds.
On receiving and unpacking your subsystem, please check the
package contents against the included Unpacking List. If any
modules are missing, please contact your subsystem vendor
immediately.
1.1.2
Model Variations
The basics of S12S are listed in Table 1-1 below:
Model
Controllers
S12S-R1032
IFT-89S10RE12 x 2
S12S-G1032
IFT-89S10GE12 x 1
Table 1-1: EonStor S12S Model Variations
S12S-R1032: The redundant-controller configuration with two
fold of the computing power and the transparent failover/failback
capability.
S12S-G1032: This single-RAID-controller configuration can not
be upgraded into a dual-controller configuration.
1.2
Chassis Overview
The S12S RAID chassis is built with rugged steel in a standard 19"
2U profile. The chassis is divided into the front and rear sections.
Due to the wide varieties of rackmount options, rackmount rails are
provided as optional accessories. You can locate information about
all major components in the following sections.
Components accessed through the front panel are referred to as
"Front Panel Components" and those accessed through the rear
panel as "Rear Panel Components."
1.2.1
Front Panel Overview
The front section of the subsystem features a 4 x 3 layout for
housing twelve (12) 3.5-inch drives. Two (2) forearm handles on the
1-2
NOTE:
Controller
Configuration
Redundant
Single (not
upgradable)
NOTE:
Expansion
Host Ports
Ports
4
2
2
1
Chassis Overview
Advertisement
Table of Contents
