Switching The Main Power Off - Fuji Xerox ApeosPort-V C5575 User Manual

2
Press the push-button power switch.
Important • Power off processing is performed internally
When the Finisher-B1 (optional), the C3
Finisher (optional), or the C3 Finisher with
Booklet Maker (optional) is installed.
Important • Power off processing is performed internally
Note

Switching the Main Power Off

The following describes how to switch the main power off.
Important • Do not switch the main power off when a screen is displayed on the touch screen or while the
1
Make sure that the power is switched off.
2
Make sure that the touch screen is blank and the <Energy Saver> button is not lit.
3
Open the front cover.
4
Press the main power switch to the [
position to switch the main power off.
The <Main Power> indicator goes out on the
control panel.
5
Close the front cover.
on the machine for a while after the power is
switched off. Therefore, do not switch the
main power off immediately after switching
the power off.
on the machine for a while after the power is
switched off. Therefore, do not switch the
main power off immediately after switching
the power off.
• When powering the machine on after it has
been switched off, wait 10 seconds after the
touch screen has gone dark.
<Energy Saver> button is blinking. Switching off the main power under such circumstances may
damage the hard disk and the memory or cause a machine malfunction.
• Switch the main power off first when unplugging the power cord. Unplugging the power cord with
the main power on may damage the hard disk and the memory or cause a machine malfunction.
]
Power Source
2
63