Fuji Xerox ApeosPort-V C5575 User Manual page 134

3 Copy
1
Use [+] and [-] or the numeric keypad to specify
a binding shift value.
[Booklet Creation - Divide Output] Screen
When you have a large number of originals, the originals are divided to create subsets to
reduce the thickness of each booklet. The machine folds copies in half, and piles them up to
form a booklet.
You can specify the number of sheets in the range from 1 to 50 in 1 sheet increments.
Note
1
Select [On].
3
2
Specify the number of sheets per subset using [+] and [-] or the numeric keypad.
[Booklet Creation - Fold & Staple] Screen
When the Booklet Maker Unit for Finisher-B1 (optional) is installed, [Fold Only] and [Fold &
Staple] become available.
When the C3 Finisher with Booklet Maker (optional) is installed, [Fold Only] and [Fold &
Staple] become available.
1
Select any option.
Off
No finishing is carried out.
Fold Only
This option is displayed when the C3 Finisher
with Booklet Maker (optional) is installed.
The copies are folded in half. The number of copies that can be folded is up to 5 (when 90
gsm paper is used). When the number is more than 5, the document is output by every 5
sheets.
Fold & Staple
This option is displayed when the C3 Finisher with Booklet Maker (optional) is installed.
The number of copies that can be folded and stapled is 2 to 16 (when 90gsm paper is used).
For the paper type and the number of sheets that can be stapled using the finisher, refer to
"16 Appendix" > "The Paper Type and the Number of Sheets That Can Be Stapled" in the
Administrator Guide.
134
• When you specify the stapling feature, specify the dividing number of sheets in the range from 1 to
15.