Fuji Xerox ApeosPort-V C5575 User Manual page 153

If the Folder Unit CD1 (optional) is installed, the output can be Z-folded.
CAUTION
Waste staples may come out with output paper. Be careful not to get injured by the
staples.
Do not staple punched holes of paper. Sharp points of a staple may cause injuries.
1
Select [Copy Output].
2
Select any option.
Auto
Copies are collated when the originals are
loaded in the document feeder.
Copies are also collated when originals are
loaded on the document glass and any of the
following features is used: 2 Sided Book
Copying, Covers, [Blank Separators & Handouts]
or [Transparency Set & Handouts] of Transparency Options, Booklet Creation, Stapling,
Build Job, Sample Set, and Combine Original Sets.
Collated
The machine outputs sheets sorted into sets that are arranged in page order.
Uncollated
The machine outputs the specified number of copies and sorts sheets by page.
Uncollated with Separators
The machine outputs copies with inserting blank sheets as a separator and sorts sheets by
page.
Separator Tray
When you select [Uncollated with Separators], select the paper tray to be used for the
separators.
When [Bypass] is selected, the [Tray 5] screen is displayed. For more information, refer to "[Tray 5] Screen" (P.105).
Staple
Specify the position for stapling. The number of sheets that can be stapled is 2 to 50 (when
80 gsm paper is used). If the 65 sheets staple Kit for C3 Finisher (optional) is installed, the
maximum number of sheets that can be stapled is 65 (when 90gsm paper is used and
thickness of bundled paper is 5.7mm or less). Available paper types are as follows:
Finisher-A1
Bond, Plain, Recycled, Plain Reload, Lightweight, Heavyweight, Heavyweight Reload,
Extra Heavyweight, Extra Heavyweight Reload, Punched, and Custom Paper 1 to 5.
Finisher-B1
Output Format
3
153