Height-Adjustable Back Canes - Physipro SPIRAL Owner's Manual

Owners manual

4.10 Height-adjustable back canes :

The Spiral tilt in space wheelchair can be equipped with a 16" to 20" (40,6 to 50,8 cm) height
adjustable back cane and 21" to 25" (53.3 to 63.5 cm). This cane is composed mainly of a cane
bottom (B), adjustable at an angle of 85° to 120°, and a cane top (A) available in 2 height ranges.
It should be noted that the bottom of the cane can be replaced by the mechanism of folding
canes. In addition, the cane top can be substituted by push handles.
To install this type of back, consult section:
Adjusting the height of the back:
1. Unscrew the bolt (C);
2. Raise or lower the cane top (A) to the
desired height;
3. Retighten the bolt (C);
Modifying the opening back angle: (See section: 4.9)
Angle limitation:
Please consult the limitation table in
Any modification made to the Spiral wheelchair must be done by a
professional. Failure to comply with this notice may have serious
consequences for the safety of users and individuals in contact with the
base and discharge Physipro of all responsibilities.
Seat depth :
4.2;
36
Figure : Adjusting the height of the back
35
35
ENGLISH
Révision 0
juillet 18
Revision 1
July 2018