Table of Contents
Advertisement
ENGLISH
7. Front Wheels
7.1 Front Wheels Installation
To change the wheels, simply follow these instructions:
1.
Determine the front wheel position on the fork. Refer to Appendix A.
Insert screw A in the corresponding hole with both spacers B between the
2.
wheel and fork on each side.
Put bolt C at the end of screw A and tighten with two 13 mm wrenches.
3.
*Note - Once tightened, the wheel must turn easily
This step is required when a change to the front wheels' position or seat
height has been made. It will help to always have a straight line, to allow
easier propulsion. Please refer to section 5.4
A
B
Figure 18 : Front Wheels Installation
22
XL5 / XL5 CI wheelchair
C
B
Advertisement
Table of Contents
