IGNITION SYSTEM
HANDLEBAR SWITCH (RIGHT)
Engine stop switch and throttle switch
1. Disconnect:
• Engine stop switch coupler
• Throttle switch coupler
2. Connect:
• Pocket tester
3. Inspect:
• Engine stop switch continuity
Faulty → Replace the handlebar switch
(right).
Switch position
RUN (pulled out)
OFF (pushed in)
4. Inspect:
• Throttle switch continuity
Faulty → Replace the handlebar switch
(right).
Throttle switch
position
Throttle lever is
operated.
Throttle lever is not
operated.
95
ELEC
Continuity
Yes
No
Continuity
Yes
No