Yamaha RX10LTGTYL Service Manual page 881

SECONDARYSHAFT
7. Install:
S Secondary sheave mounting bolt 7
NOTE:
Use the secondary sheave mounting bolt 7
and washer which tighten the secondary clutch.
8. Tighten:
S Secondary sheave mounting bolt 7
Secondary sheave mounting bolt
30 NSm (3.0 mSkg, 22 ftSlb)
9. Remove:
S Secondary shaft & slide & holder 1
S Secondary sheave mounting bolt 2
10. Install:
S Secondary sheave mounting bolt 1
11. Tighten:
S Bearing collar nut
Ring nut wrench
90890-01268, YU-01268
Bearing collar nut
55Nm (5.5mSkg, 40ftSlb)
LOCTITE
NOTE:
Install the ring nut wrench and then tighten the
secondary sheave mounting bolt 1 .
12. Check:
S Secondary shaft stiffness
CAUTION:
When the secondary shaft is operated in pe-
riodic motion, and if its movement is heavy,
install it again correctly.
27
POWR
TR
R