Tool Kit; Recommended Equipment; Opening And Closing The Shroud And Removing And Installing The Right Side Cover - Yamaha VK PROFESSIONAL-II 2016 Owner's Manual

ESU13471

Tool kit

The service information included in this man-
ual and the tools provided in the owner's tool
kit are intended to assist you in the perfor-
mance of preventive maintenance and minor
repairs. However, additional tools such as a
torque wrench may be necessary to perform
certain maintenance work correctly.
1
1. Tool kit
ECS00961
NOTICE
Before starting the engine, make sure that
the tools are properly seated in their hold-
er.
TIP
If you do not have a torque wrench available
during a service operation requiring one, take
your snowmobile to a Yamaha dealer to
check the torque settings and adjust them if
necessary.
ESU14231

Recommended equipment

It is good practice to carry the spare parts
and other necessary equipment with you
while riding the snowmobile so that minor re-
pairs can be done if necessary. The following
should be carried at all times:
 Flashlight
 Roll of plastic tape
 Steel wire
Periodic maintenance and adjustment
 Tow rope
 V-belt
 Light bulbs
When you start out for a long distance trip,
extra fuel should be carried as well.
ESU15020
Opening and closing the shroud
and removing and installing the
right side cover
EWS00811
WARNING
Be sure the shroud and right side cover
are secured before operation. A loose
shroud or cover could move and cause
loss of control.
Shroud
To open the shroud
Unhook the shroud latches, and then slowly
raise the shroud forward until it stops.
2
1. Shroud
2. Shroud latch
To close the shroud
Slowly lower the shroud to its original posi-
tion, and then hook the shroud latches.
Right side cover
To remove the right side cover
1. Open the shroud. (See the above proce-
dure.)
2. Remove the bolts, and then remove the
side bumper.
1
2
45