2.3
Package Contents
The rear view shown in the above figures does not apply to SX1012, SX1016 and
SX1024.
Before installing your new system, unpack the system, and check, against the parts list below,
that all the parts have been sent. Check the parts for visible damage that may have occurred dur-
ing shipping.
The system package content is as follows:
• 1 – System
• 1 – Rail kit (not applicable for half-width systems)
• 1 – Power cable for each power supply unit – Type C13-C14
• 1 – Harness: HAR000028 – Harness RS232 2M cable – DB9 to RJ-45
• 1 – Quick Start Guide
If anything is damaged or missing, contact your sales representative at support@mella-
nox.com.
Mellanox Technologies
13